FACILITIES
- A shop of 11x18m that includes a Control room, of 4.3 x 8, 4m
- A bridge crane of 10m, with two hooks 10 and 3 tons load and maximum elevation 6 m.
- A hydraulic central driven 40CV engines 2 and 4 engines 50CV, capable of providing up to 250 bar (210 bars, nominal pressure) and flow rate up to 640 l/min.
- An auxiliary assembly room of about 1000m2 with 2 bridges crane 16 and 20 T.
[full]
[/full]
INSTRUMENTATION
[full][third flow=”start”]
Vibration controllers
Sine, random and shock controller:
Eight inut channels and one output channel (3)
Random, shock and SRS controller:
Four input channels and two output channels (1)
Sixteen input channels and two output (1)
[/third][third flow=”hold”]
Signal monitoring:
Disconttinuity Detectors, 12 channels, (0.5-20 ms), (2)
A data acquisition and processing system, 31 channels, 200 kHz (1)
A data acquisition and proccesing system, 24 channels, 1 MHz (2)
[/third][third flow=”end”]
Signal recorders:
24 input channels and 24 output channels (1)
24 input channels and 12 output channels (1)
[/third]
[/full]
[full][third flow=”start”]
Sensors of vibration:
32 piezoelectric accelerometers
6 four channel amplifiers
8 single channel amplifiers
2 laser sensors ±1 and ±50 mm
[/third][third flow=”hold”]
Signal analyzers:
16 channels
8 channels
4 channels
[/third][third flow=”end”]
Others:
Accelerometer calibration set
Automatic accelerometer calibration system
8.5 digit digital multimeter
6.5 digit digital multimeter
4.5 digit portable digital multimeter
Dc power supplies 1000W/17A/200V; 1500W/10A/150V; 1500W/5A/300V
[/third]
[/full]
[full]
[/full]
CHARACTERISTICS OF TEST PLATFORMS
[full][half flow=”start”]
- EDB 250 BIAXIAL INDEPENDENT PLATFORM
- 2500x2500mm
- 2x150kN
- ± 125mm
- 800mm/s
- 6g
- 0 a 200 Hz
- Maximum test mass: 7.500Kg
(depending on the required test level) - Maximum height of the equipment to be tested: 5,500mm
[/half] [half flow=”end”]
- EDB 120 BIAXIAL INDEPENDENT PLATFORM
- 1200x1200mm
- 2x100kN
- ± 125mm
- 1000mm/s
- 10 g
- 0 a 100Hz
[/half][/full][full]
[full][full][third flow=”start”]
- ELECTRODINAMIC PLATFORM LDS 824LS
- 750x750mm
- 27kN (53,4 shock)
- 1,54m/s
- 1,78m/s (shock)
- ± 19mm
- 60g (sinus)
- 0 a 3200 Hz
[/third][third flow=”hold”]
- ELECTRODINAMIC PLATFORM LDS650
- 2.2 kN
- ±12.7 mm.
- 1 54 mm/s.
- 100g
[/third][third flow=”end”]
- DROP TESTING DEVICE ECCL 50X50
- 500x500mm
- 600 mm, maximum height drop
[/third]
[/full][full]
[/full]